TOP > ENGLISH > Product Line > Eddy current thickness tester > Eddy current DS-110

Eddy current thickness tester DS-110

Eddy current thickness tester DS-110

High precision by crystal oscillation
Measured with curved surface / spherical pair in short measuring time

・ Reading of measured value display digitally and easy to read
Start the measurement at the same time as turning on the switch, measurement time within 1 second
・ High stability by the crystal oscillation method & plusmn; 1%) High accuracy
・ Destructible with 100% inspection because it is non-destructive
・ No need for conversion because it is a direct reading type

Characteristics of Eddy current thickness tester DS-110

Readable digital format

It is easy to read the measured value display digitally.

It is possible to measure it immediately

Measurement can be done at the same time as switching on. The measurement time is also within 1 second.

High stability (& plusmn; 1%) high accuracy

High stability (& plusmn; 1%) high accuracy by crystal oscillation method.

100% inspection is possible

It is nondestructive and you can do 100% inspection.

No conversion required

Direct reading, no conversion needed.

Supports various measurements

Can measure the film, plating, coating, resin, etc. on metal (eg, oxide film on aluminum, plating of zinc on iron, etc.).

Remote switch

You can read data by remote switch.

Can store up to 1000 data

One inspection line can store 1000 data.

Measure metal films on nonmetals

Can measure metal films on nonmetals (eg plating on plastic).

It is possible to measure up to 70 types of film thickness by 4 types as standard.

By switching the switch, you can measure up to four types of film thickness. In addition, more than 70 types of film thickness measurements can be made by replacing inspection lines at the manufacturer.

Measured even inside a curved surface, spherical body, or pipe

Can measure curved or spherical surfaces. In addition, the inner surface of the pipe etc. can also be measured (& phi 12.7 mm or more).

Can judge the difference in material

Can judge the difference of material.

Print out function

You can print out measured data and statistical processing values.

Measurement principle

Measurement principle   When the probe (probe coil) with high frequency current is brought close to the metal, an eddy current is generated in the metal surface.The eddy current is affected by the strength, frequency, conductivity of the metal, thickness, shape, etc. of the high frequency magnetic field, and the penetration depth and its size differ.
And since the eddy current flows so as to cancel the high frequency magnetic field of the probe, the high frequency resistance value of the probe changes.The variation of this high frequency resistance is amplified, the curve is corrected, and it is displayed as a digital value.Because of this, film thickness values can be read directly by numbers.Curve correction is performed by a microcomputer.Because of this, it is highly accurate and stable.

Specification of Eddy current thickness meter DS-110

Power supply AC 100 V to 240 V by using AC adapter
Weight 3.4kg
Size 330(W)×180(D)×90(H)mm

Note: Specifications are subject to change without notice.

Probe specification of Eddy current thickness tester DS-110

1.Scope of probe effect
 When using extra-fine probe
φ5mm
φ3mm
2.Probe cord length 900mm
3.Measurable on a curved surface depending on the type of guide
4.Probe type MP type …For flat and uneven surface (standard)
MPG type …For flat uneven surface (with guide)
SM type …For flat and uneven curved surfaces (very thin)
RP type …Concave surface, for pipe inner surface
SR type …For small diameter pipe inner surface
Depending on the film thickness measured on the above probe, There are four types, A, B, C, and D, respectively.
5.Probe guide #180:For plane measurement
#120:φ25~60mm For convex surface measurement
#90 :φFor measuring convex curved surface less than 30 mm
お問い合わせ
デジタルカタログ

  • Web Ctalog
  • Webカタログ
  • 各カタログをWEB上にてご覧頂けます。iPhoneやiPadでもご覧頂けます。

  • A Catalog IS Seen

おすすめ製品

prev next

Three Structure

  • 電測の3つのつよみ
  • 導入いただいた機器の点検・修理のお申し込みは下記からご依頼ください。

  • The Request For Repair

Our History

 

ISO Attestation Mark

これからも業界を牽引しお客様の製品品質向上と発展を支えていきます。